Calculate shipping costs
Estimated Shipping Cost: Total Cost:
Ready to reveal the natural beauty of your wood surfaces? Minwax® Wood Finish™ is a penetrating oil-based wood stain that delivers rich, vibrant color while enhancing the natural grain. Specially formulated for easy application and even results, this stain absorbs deeply into the wood pores—ideal for unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors.
With a quick 2–3 hour dry time, you can stain and finish in the same day, helping you complete projects faster without compromising on beauty.
Deeply penetrating color—enhances wood’s natural beauty in just one coat
Quick drying—ready to recoat or finish in only 2–3 hours
Semi-transparent opacity—highlights the grain while adding rich color
Resists lapping for smooth, even color without streaks
Massive coverage—500–600 sq. ft. per gallon
Available in 36 beautiful colors to match any style
Technical Details:
Location: Interior use only
Opacity: Semi-Transparent
Dry Time: 2–3 hours
Recoat Time: 2–3 hours
Recommended Coats: 1 coat for rich, even coverage
Available Sizes: 1-Quart, 1-Gallon
Cleanup: Mineral spirits
Application Tips:
Sand wood surfaces to a smooth finish before staining
Stir thoroughly before and during use—do not thin
Apply with a clean cloth, brush, or foam applicator
Allow stain to penetrate 5–15 minutes, then wipe off excess for desired color
Perfect For:
Furniture, cabinets, doors, trim, molding, and hardwood floors
Pro Tip: Minwax stain requires an additional flooring sealer for the best performance and durability
Achieve professional, gorgeous results with ease—choose Minwax® Wood Finish™ for rich color, quick drying, and timeless beauty!
The drying time for chestnut spirit stain can vary depending on the environmental conditions, but generally, it takes about 2-4 hours for the stain to dry to the touch. However, it is recommended to wait at least 24 hours before applying a topcoat or finishing product to ensure proper curing.
Yes, Minwax is owned by Sherwin Williams.
Yes, Minwax stain typically requires a topcoat to protect the surface and enhance durability. It is recommended to use Minwax clear protective finishes like polyurethane, lacquer, or varnish on top of the stain for a long-lasting and beautiful finish.
Minwax stain typically takes about 24 hours to dry and cure. However, drying times can vary depending on factors such as humidity, temperature, and the type of wood you're staining. It's always a good idea to wait at least 24 hours before applying any additional coats or finishing products.
For best results, wait at least 4-6 hours between coats of Minwax stain. This allows the previous coat to fully dry before applying another coat. Make sure to follow the instructions on the can for the most accurate drying time.
Minwax stain comes in a wide range of colors. Some popular options include English Chestnut, Early American, Ipswich Pine, and more. You can explore the full selection of Minwax stain colors on our website.
The drying time for Minwax stain can vary depending on factors such as temperature and humidity. On average, it takes around 4-6 hours for the stain to dry to the touch. However, it is recommended to wait at least 8 hours before applying a topcoat or handling the stained surface to ensure proper drying and curing.
Once opened, Minwax stain can last for several years if stored properly. Make sure to tightly seal the container to prevent air exposure, and store it in a cool, dry place. This will help maintain the quality and effectiveness of the stain for longer periods of time.
Minwax is a brand of wood stain that is used to enhance and protect the natural beauty of wood. It adds color and adds a protective finish to wood surfaces, such as furniture, floors, cabinets, and more.
It is recommended to let the stain sit for about 5-15 minutes before wiping off the excess. However, the exact time may vary depending on the brand and product instructions. It's best to refer to the specific stain's instructions for the recommended waiting time.